The single-phase busbar modules can be fixed directly onto the floor slab, walls ceilings and or on unistrut. The track comes with integral fixing flanges, which are used to fix the track to the floor slab. If required spacer brackets can be provided for raising the track off the floor slab. This can be useful of a raised floor installation where the floor is very uneven or has obstacles and or damp problems.
Specials
The Mains Connection Module MCM (starter module)
Typically comprises sockets at 300mm pitch with various socket colour and pin configurations
Fabricated from 1.2mm hot dip galvanised steel with an integral terminal chamber hence no separate feed unit required
- terminal blocks for up to 16mm sq. terminal blocks
- 20/25mm cable entry
- Integral fixing brackets
- Fully sealed and maintenance free sockets
- Sockets rated to 15000 insertions / withdrawals
- 3-Pin configurations available
The Mains Connection Module MCM (starter module)
Typically comprises sockets at 300mm pitch with various socket colour and pin configurations
Fabricated from 1.2mm hot dip galvanised steel with an integral terminal chamber hence no separate feed unit required
- terminal blocks for up to 16mm sq. terminal blocks
- 20/25mm cable entry
- Integral fixing brackets
- Fully sealed and maintenance free sockets
- Sockets rated to 15000 insertions / withdrawals
- 3-Pin configurations available
Available in various configurations, can be supplied as
- Standard Earth,
- Dual Earth
- Clean Earth
Pin configurations for physical discrimination between track/supplies,
- Standard,
- non standard D,
- Keyed
Choice of six socket colours
- White
- Red
- Blue
- Yellow
- Green
- Black
Other Features
- Fully ASTA licensed
- Solid build with robust fabricated box section
- ALL components made from 1.2mm galvanised steel
- Complies with the requirements of B.S. 7671, IEC60309…..
- Feed/Terminal chamber supplied with 20 hole with 25mm dia. k/out
- Capable of floor voids as low as 60mm
Other Features
- Fully ASTA licensed
- Solid build with robust fabricated box section
- ALL components made from 1.2mm galvanised steel
- Complies with the requirements of B.S. 7671, IEC60309…..
- Feed/Terminal chamber supplied with 20 hole with 25mm dia. k/out
- Capable of floor voids as low as 60mm
